safety and debris netting-manufacture,factory,supplier from China

Production processThe production process of safety debris net is as follows:Raw material preparation: Prepare raw materials such as net body, side rope, tie rope, etc.

Agricultural field:Crop protection: Covering on farmland and orchards, effectively preventing birds from pecking crops and fruits, such as grapes, cherries, pear trees, apples, etc.Pest control: In addition to preventing birds, it can also block the spread of pests to a certain extent and reduce the occurrence of pests and diseases.Flower protection: Protect flowers from damage by birds and maintain the beauty and health of the garden.Vegetable protection: Prevent birds from pecking at vegetable leaves and fruits to ensure the normal growth and yield of vegetables.Environmental control: Cover

High-altitude construction protection: During the construction of high-rise buildings, workers need to operate at high altitudes. Debris safety nets can be set up outside the scaffolding or around the building to prevent workers from falling from heights and intercept possible falling construction materials or tools.Safety isolation area: In construction sites, there are many dangerous areas such as deep pits, blasting areas, high-voltage areas, etc.

Production processThe production process of debris safety net includes the following steps:Raw material procurement: Select high-quality polyethylene materials or other corrosion-resistant materials as raw materials.Wire drawing or wire making: Process the raw materials into fine or thick wires that meet the requirements.

Production processThe production process of debris safety net mainly includes the following steps:Raw material preparation: Select high-quality raw materials, such as high-strength fiber or polyethylene.Wire drawing: The raw materials are drawn into filaments to meet the needs of weaving nets.Weaving nets: The filaments are woven into a mesh structure through the weaving method of the dense mesh weaving machine.Finishing and inspection: The woven nets are sorted, defects are removed, and quality inspection is carried out.Packing and warehousing: The nets that have passed the inspection are pac

Production processThe production process of safety debris net (taking building safety net as an example) includes the following steps:Raw material procurement:Select suitable raw materials, such as virgin plastic particles or recycled materials (such as mineral water bottle cap materials), crush and granulate them by machine.Wire drawing and filament making:After the raw materials are heated and melted, they are drawn into plastic wires through a wire drawing machine.

Application scenariosConstruction: At construction sites, debris safety nets can be used to protect building walls, roofs, scaffolding and other areas to prevent debris splashing during construction from causing harm to workers and the surrounding environment.Equipment protection: In industries such as metallurgy and mining, large mechanical equipment may produce debris splashing during production.

Construction sites: On construction sites, debris fences can be used as temporary enclosures to isolate the construction area from the surrounding environment, protect the safety of workers and pedestrians, and prevent the scattering of construction waste and debris.Public areas: In public areas such as parks and squares, debris fences can be used as landscape fences or guardrails to beautify the environment and provide necessary safety protection.Private residences: In private residences, debris fences can be used as walls or railings to protect the privacy and safety of residents while impro

The construction debris safety nets is woven with high-strength plastic material, which can effectively intercept falling debris during construction and ensure the safety of people and property in the area below.

The construction debris safety netting is woven with high-strength recycled plastic material to effectively intercept falling debris during construction, ensuring the safety of people and property below. It is lightweight, durable and easy to install.

Highway and high-speed railway bridges: These bridges are designed for high speeds. Once an object falls from the bridge, it may have a serious impact on driving safety and the surrounding environment. Therefore, it is essential to install anti-throw nets on these bridges.Corridors and overpasses: Corridors and overpasses are often used for pedestrian passages. If an object falls from above, it is likely to cause harm to pedestrians. Installing anti-throw nets in these places can increase pedestrian safety.

Production processThe production process of debris safety net includes the following steps:Raw material procurement: Select suitable high-strength materials, such as high-density polypropylene, high-density polyethylene, etc.Processing: Mixing, injection molding, drawing, weaving and other processing of raw materials to form the required mesh structure.Quality inspection: Quality inspection of the processed debris safety net to ensure that it meets the relevant standards and requirements.Packaging and delivery: Qualified debris safety nets are packaged, and documents such as product certificat

Production processThe manufacturing manner of particles safety internet consists of the following steps:Material preparation: Select substances that meet the requirements, such as polyethylene, polypropylene, etc., and operate pretreatment such as stirring, heating, and drawing.Weaving or welding: According to the layout requirements, the pretreated wire is woven to structure a mesh structure.

Construction:During construction, yellow debris protection nets are widely used for safety protection in dangerous areas such as foundation pits, edges, and openings.

Building construction: In high-rise building construction, dense mesh is widely used to prevent construction workers, tools and materials from falling from high altitudes, as well as to block splashing gravel and debris, protecting people and equipment below from harm.Mining: In the process of mining, ore splashing and collapse are common safety hazards.

High-altitude construction protection: During the construction of high-rise buildings, workers need to operate at high altitudes. Debris safety nets can be set up around the buildings to prevent workers from falling from heights and ensure their safety.Safety isolation area: There are usually many dangerous areas on construction sites, such as deep pits, blasting areas, high-voltage areas, etc.

Blasting operations: In blasting operations, debris protection nets are used to block and intercept flying rocks generated by blasting, protecting the safety of surrounding personnel, equipment and buildings.

Blasting operation: Blasting is a common and efficient means in various engineering construction and mining. However, the flying rocks generated during the blasting process pose a huge safety hazard to the surrounding environment and personnel. Hercules debris protection net can effectively block and intercept these flying rocks and protect the safety of surrounding personnel and equipment.Construction: On construction sites, protection nets are often used to set up safe isolation areas, prevent falling objects from high altitudes from injuring people, and shield construction debris.

Improve building safety: Scaffolding safety nets can efficaciously stop security accidents such as falling objects and humans falling from excessive altitudes, and furnish dependable security safety for development workers.Reduce development costs: Since the set up and disassembly of scaffolding safety nets are surprisingly easy and quick, and have a lengthy provider life, they can limit cloth prices and labor expenses in the course of the development process. At the equal time, its lifting and adjusting feature additionally avoids the bother and fee of persistently constructing scaffolding.

Blasting operation: In blasting operation, debris protection nets are widely used to block and intercept flying rocks generated by blasting. It can effectively protect the safety of surrounding personnel, equipment and buildings, and ensure the smooth progress of blasting projects.Construction: On construction sites, protection nets are used to block sharp objects such as glass fragments and steel bars to prevent workers from accidentally touching or being stabbed.

Production processThe production process of debris safety net mainly includes the following steps:Raw material procurement: Purchase natural plastic particles (such as high-density polyethylene) or recycled materials (such as mineral water bottle cap materials), and granulate them by mechanical crushing.Wire drawing or silk making: Process the raw materials into plastic wire, and control the cooling water temperature to ensure the thickness, color and flexibility of the plastic wire.Weaving: Use a close-mesh loom for weaving, control the weaving structure and weaving density of the close-mesh

Blasting operation: In blasting operation, particles safety nets are broadly used to block and intercept flying rocks generated via blasting. It can efficiently defend the protection of surrounding personnel, tools and buildings, and make certain the easy growth of blasting projects.Construction: On development sites, safety nets are used to block sharp objects such as glass fragments and metal bars to stop employees from by accident touching or being stabbed.

The debris nets is woven with high-strength plastic fibers and is specially designed to intercept falling debris from high altitudes. It effectively protects the safety of people below and is easy to install and maintain.

Construction sites:During the construction of high-rise buildings, bridges, tunnels, etc., debris safety nets can be set up in dangerous areas such as the outside of scaffolding and the edge of floors to prevent debris such as building materials and tools from falling and injuring people.High-altitude operations:In operations such as glass curtain wall installation, exterior wall cleaning, and high-altitude maintenance, debris safety nets can be set up below the work area to prevent accidental falling debris from causing harm to people below.Machining and cutting:During machining, metal cuttin